Hazard Reference: Flammable liquid and vapor; causes severe skin burns and eye damage. Prevent ingestion, inhalation and skin contact. The acute-toxicity classification and complete hazard labeling must be confirmed in the current SDS for the supplied material before use.
Handling: Use suitable local exhaust ventilation and control ignition sources and static discharge. Avoid breathing vapor or mist. Select chemical-resistant gloves, protective clothing, eye and face protection, and any respiratory protection according to the current SDS and workplace exposure assessment.
Storage: Keep containers tightly closed in a cool, dry, well-ventilated area. Follow the supplied-grade SDS for protection from air, inert-gas requirements, compatible containers and segregation from acids, oxidizing agents and other incompatible materials.
Transport Reference: UN 2526, Furfurylamine; Class 3 with subsidiary hazard 8, Packing Group III. Confirm the applicable shipping description, packaging and carrier requirements for the actual material and transport mode.
Documentation: Request the applicable SDS and batch-specific COA before ordering. The pictograms below illustrate flammability and corrosion only; use the supplied-grade SDS for the complete label, including any acute-toxicity pictogram. This page does not replace the SDS or a process safety assessment.
Furfurylamine CAS 617-89-0
Furfurylamine (2-Furfurylamine) CAS 617-89-0 from Aure Chemical
Furfurylamine, also known as 2-furfurylamine, furan-2-ylmethanamine or 2-(aminomethyl)furan, CAS 617-89-0, is a primary amine with a furan ring connected to an aminomethyl group. Its molecular formula is C₅H₇NO. It is used as an intermediate in pharmaceutical and specialty chemical synthesis and in the development of furan-functional materials. Aure Chemical supports China sourcing and export supply, with specification review, quality documentation and supplier coordination for the intended application.
The primary amine can undergo reactions such as amidation, imine formation and epoxide ring opening, while the furan group offers additional opportunities for chemical modification. The reference quality analysis below covers a ≥99% GC-content grade and distinguishes its reported water content from the chromatographic integration data.
Basic Information of Furfurylamine
Identity and general reference properties are listed below. These values are separate from the reported acceptance limits and analytical results for the reference production lot.
| CAS No.: | 617-89-0 |
|---|---|
| EC No.: | 210-536-9 |
| Molecular Formula: | C₅H₇NO |
| Linear Formula: | C₄H₃OCH₂NH₂ |
| Molecular Weight: | 97.12 g/mol |
| Appearance: | Colorless or light yellow liquid (reported grade specification) |
| Odor: | Amine-like odor (reference description) |
| Melting Point: | Approximately −70 °C (reference value) |
| Boiling Point: | 145–146 °C (reference range) |
| Solubility: | Soluble in water. Confirm compatibility with the intended solvent and reaction system. |
| Chemical Functionality: | Primary amine containing a furan ring and an aminomethyl group. |
| Transport Reference: | UN 2526, Furfurylamine; Class 3, subsidiary hazard 8, Packing Group III. Confirm the current supplied-grade SDS and transport-mode requirements. |
| Chemical Structure: | ![]() |
Confirm the required GC content, water limit and appearance criteria before ordering. The supplied analysis does not establish a complete impurity profile, regulatory-use qualification or renewable feedstock content.
Reference Quality Analysis
The following parameters provide a technical reference for evaluating the ≥99% GC-content furfurylamine grade, including appearance, water content and furfurylamine content. Reported acceptance limits are shown separately from the corresponding analytical results for one production lot.
| Test Item | Reported Specification | Reference Result |
|---|---|---|
| Appearance | Colorless or light yellow liquid | Colorless, clear liquid |
| Water Content (%) | ≤0.5% | 0.20% |
| Furfurylamine Content (GC, %) | ≥99% | 99.55% |
The content test is identified as GC in the COA, but detailed chromatographic conditions, the calculation basis and the water test method are not stated. The water result and the GC content result should be reviewed as separate analytical parameters.
Supplementary GC Integration Profile

The accompanying chromatographic integration table reports seven peaks with the retention times and percentage values reproduced below. It does not assign chemical names to individual peaks or provide separate peak-specific acceptance limits.
| Test Item | Reported Specification | Reference Result |
|---|---|---|
| GC Peak 1 — Retention Time 1.735 min | Not stated | 0.005% |
| GC Peak 2 — Retention Time 2.901 min | Not stated | 99.555% |
| GC Peak 3 — Retention Time 3.040 min | Not stated | 0.003% |
| GC Peak 4 — Retention Time 3.142 min | Not stated | 0.377% |
| GC Peak 5 — Retention Time 6.913 min | Not stated | 0.058% |
| GC Peak 6 — Retention Time 15.199 min | Not stated | 0.001% |
| GC Peak 7 — Retention Time 17.250 min | Not stated | 0.001% |
The COA reports furfurylamine content as 99.55%, while the integration table reports 99.555% for the largest peak at 2.901 min. Both values are retained at their respective reported precision. No chemical identity is inferred for the unnamed peaks. The chromatographic percentage basis is not explicitly defined; these values should not be combined with the water result to calculate a total mass composition. Retention times are method-dependent.
These analytical values are provided for preliminary technical evaluation and should not be interpreted as guaranteed results for every shipment. Please contact Aure Chemical to confirm the applicable quality requirements and request the relevant batch-specific Certificate of Analysis (COA) before ordering. Any limits for named impurities, metals or other unreported parameters should be agreed separately.
Primary Applications of Furfurylamine
Furfurylamine is selected for its primary amine reactivity and the furan group retained in its derivatives. Required purity, water content and impurity limits depend on the downstream chemistry.
Pharmaceutical Intermediate Synthesis: Used as a building block for selected pharmaceutical intermediates. The aminomethyl group can be incorporated into more complex structures through suitable bond-forming reactions. Pharmaceutical processing requires application-specific impurity controls and qualification beyond the reference COA.
Specialty Chemical Synthesis: Used to introduce a furfuryl group into amides, imines and other nitrogen-containing intermediates. Its primary amine and furan ring provide different reaction sites; reaction selectivity and work-up requirements must be established for the intended route.
Polymer and Resin Development: Investigated in furan-functional epoxy and resin chemistry, including epoxide ring-opening reactions and systems designed for furan–maleimide Diels–Alder chemistry. These are formulation- and process-dependent applications; the reference grade does not guarantee thermal, mechanical or recyclability performance.
Ligand and Coordination Chemistry Research: Condensation with suitable carbonyl compounds can produce Schiff-base derivatives that have been studied as ligands for metal complexes. The behavior of a resulting complex must be assessed separately; general catalyst-performance claims are not established by the raw-material COA.
Corrosion Inhibitor and Flux Formulation: Reported uses include corrosion inhibition and soldering-flux manufacture. Suitability depends on the metal, formulation, concentration and service conditions. A corrosion-inhibitor application does not remove the handling hazards of the neat amine.
Aure Chemical: Furfurylamine Sourcing and Export Support
Aure Chemical is a chemical trading and export supply company supporting furfurylamine purchases from China through specification review, supplier coordination, quality documentation and international export logistics.
Specification Review: Review GC content, water and appearance requirements against available product documentation. Limits for specific impurities or other application requirements should be stated before ordering.
Quality Documentation: Confirm availability of the applicable technical specification, current supplied-grade SDS and batch-specific COA. Supplementary chromatographic data are reviewed separately from agreed acceptance limits.
Supplier Coordination: Confirm grade availability, quantity, packaging, lead time and any additional testing or inspection arrangements for each inquiry.
Export Logistics: Coordinate dangerous-goods packaging and shipping documentation with logistics providers according to the current SDS, transport mode and destination requirements.
Please provide the required quantity, destination and purchasing specification so that Aure Chemical can review the available supply options and supporting documentation.
Safety, Handling & Documentation


Packaging
200 L steel drum
Final packaging, capacity and net weight are confirmed in the quotation and order.


