Hazard Overview: Ammonium fluoride presents acute toxicity hazards through ingestion, skin exposure, and inhalation. Prevent dust dispersion and contact with the product.
Handling: Use suitable dust containment and local exhaust ventilation. Select gloves, protective clothing, eye protection, and any respiratory protection according to the current SDS and the assessed operation.
Storage and Reactivity: Keep containers securely closed in dry, ventilated conditions. Protect from moisture and heat, and follow the SDS for segregation from acids and other incompatible materials. Thermal decomposition can release hydrogen fluoride and ammonia.
Transport Reference: UN 2505, AMMONIUM FLUORIDE; Class 6.1; Packing Group III. Confirm shipment classification, approved packaging, and labeling against the current SDS and transport rules.
Emergency Procedures: Follow the product SDS and site procedures for exposure, spills, and waste handling. Arrange prompt medical assessment following suspected significant exposure.
Ammonium Fluoride CAS 12125-01-8
Ammonium Fluoride (NH₄F) CAS 12125-01-8 from Aure Chemical
Ammonium fluoride, NH₄F, CAS 12125-01-8, is a water-soluble inorganic salt consisting of ammonium and fluoride ions. It is used as a fluoride source in selected glass-processing formulations, surface treatment systems, and chemical synthesis routes. This page presents reference data for a solid product with a reported NH₄F assay requirement of ≥ 95.0%. Aure Chemical supports China chemical sourcing and international export requirements through product specification review, quality documentation, supplier coordination, and shipment planning.
Basic Information of Ammonium Fluoride
The following information identifies solid ammonium fluoride. The assay, solution pH, residue, and impurity results for one production lot are listed separately in the Reference Quality Analysis section.
| CAS No. | 12125-01-8 |
|---|---|
| EC No. | 235-185-9 |
| Chemical Formula | NH₄F |
| Molecular Weight | 37.04 g/mol |
| Product Form | Solid |
| Appearance | White crystalline solid, as specified in the reference COA |
| Reference Assay Requirement | NH₄F ≥ 95.0%, as stated in the reference COA |
| Thermal Behavior | Decomposes on heating; consult the current product SDS for thermal data |
| Water Solubility | Readily soluble in water |
| Moisture Sensitivity | Hygroscopic; protect from moisture during storage and handling |
| Transport Reference | UN 2505, AMMONIUM FLUORIDE, Class 6.1, Packing Group III; confirm against the current product SDS and applicable transport requirements |
| Chemical Structure | ![]() |
Product qualification should address NH₄F assay, residue on ignition, chloride, sulfate, iron, and the reported heavy-metals parameter. Confirm the applicable grade and any additional application-specific requirements before ordering.
Reference Quality Analysis
Solid Product: Reported NH₄F Assay Requirement ≥ 95.0%
The following parameters provide a technical reference for evaluating ammonium fluoride, including assay, pH at the stated test concentration, residue on ignition, anionic impurities, iron, heavy metals, and appearance. The results represent one production lot.
Standard cited in the reference COA: GB/T 1276-1999, Chemical reagent — Ammonium fluoride. The table reproduces the report's stated limits and results; confirm the applicable grade designation and agreed purchase specifications for new orders.
| Test Item | Reported Specification | Reference Result |
|---|---|---|
| Ammonium fluoride content (NH₄F) | ≥ 95.0% | 96.01% |
| pH (0.5 g/L) | 5.0–7.0 | 6.57 |
| Residue on ignition | ≤ 0.10% | 0.03% |
| Chloride (as Cl) | ≤ 0.03% | 0.0050% |
| Sulfate (as SO₄) | ≤ 0.1% | 0.010% |
| Iron (Fe) | ≤ 0.0050% | 0.0010% |
| Heavy metals (as Pb) | ≤ 0.0050% | 0.0010% |
| Appearance | White crystalline solid | Conforms |
The pH result applies to the stated 0.5 g/L test solution. Heavy metals are retained as the aggregate parameter “as Pb” reported in the COA.
These analytical values support preliminary technical evaluation and do not guarantee the specifications or results of every shipment. Contact Aure Chemical to confirm the required grade, quality limits, and relevant batch-specific Certificate of Analysis (COA) before ordering.
Primary Applications of Ammonium Fluoride (NH₄F)
Ammonium fluoride can serve as a fluoride component in suitable process formulations. Selection should consider the complete formulation, substrate compatibility, and the impurity requirements of the intended use.
Glass Etching and Silica Surface Processing:
Used as a component in selected fluoride-containing glass and silica treatment formulations. Etching behavior depends on acidity and the complete bath composition. The required NH₄F grade should be qualified for the intended surface finish and process.
Specialty Cleaning and Metal Surface Treatment:
Used as a fluoride source in selected industrial cleaning and surface-treatment systems. Formulation development requires evaluation of the substrate, solution chemistry, equipment materials, and acceptable residue levels.
Chemical Reagent and Inorganic Fluoride Synthesis:
Used in selected routes to inorganic fluorides and other fluoride-containing materials. Assay, chloride, sulfate, ignition residue, and metal impurities should be reviewed against the requirements of the target compound.
Electronics and other sensitive applications require separate qualification of the commercial grade and the individual impurity limits relevant to the process.
Aure Chemical: Ammonium Fluoride Sourcing and Export Support
Aure Chemical is a chemical trading and export supply business. We coordinate with suppliers to review proposed ammonium fluoride grades, supporting documentation, and order requirements.
Specification Review: Review the required NH₄F assay, solution pH conditions, residue, anionic impurities, iron, and heavy-metals limits against the available product documentation.
Supplier Coordination: Confirm the proposed grade, available quantity, packaging options, and dispatch timing for the specific order.
Quality and Safety Documentation: Coordinate requests for the relevant batch COA, current product SDS, and available technical data or test-method clarification.
International Export Logistics: Coordinate packaging, labeling, shipping documentation, and transport arrangements according to the supplied product, destination, and carrier requirements.
For a sourcing inquiry, please provide the intended application, required specifications, order quantity, packaging requirements, and destination.
Safety, Handling & Documentation
Obtain the current SDS for the supplied grade before handling, storage, or transport. Confirm the applicable hazard classification, labeling, and exposure controls from that document.

Packaging
Please contact us to confirm available packaging options.
Final packaging, capacity and net weight are confirmed in the quotation and order.


